The DJI Neo 2 Intelligent Flight Battery is designed with a compact drone design and stable flight time in mind. It provides up to 19 minutes of flight time on a single charge, allowing for multiple handheld takeoffs and landings and the freedom to capture everyday footage.
The battery provides reliable power for intelligent modes like Circle, Rocket, and Dronie, ensuring consistent performance when shooting photos and videos.
| Model |
DJI Neo 2 Intelligent Flight Battery |
| Capacity |
1606 mAh |
| Nominal voltage |
7.16 V |
Product description
The DJI Neo 2 Digital Transceiver enables stable, low-latency video transmission during flights using a controller or FPV goggles. Once installed, the drone can transmit video in real time, ensuring smooth viewing and precise flight control.
The module was designed specifically for DJI Neo 2 and is an essential element when using classic RC control or immersive FPV flights with goggles.
Key features
| Video transmission |
Stable, low-latency signal |
| Dedicated fit |
Designed for DJI Neo 2 |
| Small dimensions |
Compact and lightweight design |
| Easy assembly |
Quick installation on the drone |
Technical specifications
| Model |
DJI Neo 2 Digital Transceiver |
| Dimensions |
44.6 × 27 × 44.6 mm |
| Libra |
Approx. 9 g |
Contents of the set
| Transmission module |
1× DJI Neo 2 Digital Transceiver |
Compatibility
Note: Do not install or remove the module while the drone is powered on. Check the tightness of the screws regularly (approximately every 30 flight hours).
Product description
The DJI Mini 5 Pro Fly More Combo is a complete package for content creators and aerial photography enthusiasts who want the highest image quality in an ultra-light and portable design. The drone is equipped with an advanced 1-inch CMOS camera, allowing it to capture detailed photos and smooth, high-resolution video footage.
The Fly More Combo includes additional batteries, a charging hub, and accessories that significantly extend flight times and enhance field experience. The DJI Mini 5 Pro offers intelligent tracking modes, advanced safety systems, and stable video transmission, making it ideal for both professional and amateur use.
Key features
| Camera |
1-inch CMOS sensor, 50 MP |
| Video |
4K/60fps HDR |
| Stabilization |
3-axis gimbal |
| Flight time |
Up to approx. 36 minutes |
| Intelligent modes |
ActiveTrack 360°, QuickShots, Hyperlapse, MasterShots |
| Obstacle detection system |
Multi-directional (front, back, down) |
| Video transmission |
DJI O4 – up to 20 km (FCC) |
Technical specifications
| Model |
DJI Mini 5 Pro |
| Starting weight |
< 249 g |
| Matrix |
1-inch CMOS |
| Photo resolution |
50 MP |
| Video resolution |
4K up to 60 fps |
| Video formats |
MP4 / MOV |
| Max flight time |
Up to 36 minutes |
| Max flight speed |
16 m/s |
| GNSS system |
GPS + Galileo + BeiDou |
Contents of the set
| Drone |
1× DJI Mini 5 Pro Aircraft |
| Controller |
1× DJI Controller (depending on version) |
| Batteries |
3× Intelligent Flight Battery |
| Charging hub |
1× Two-Way Charging Hub |
| Spare propellers |
2× pairs |
| Power cable |
1× USB-C |
| Carrying bag |
1× |
Compatibility
| App |
DJI Fly |
| Accessories |
Accessories dedicated to the DJI Mini 5 Pro series |
Product description
The DJI Mini 5 Pro is an ultralight, advanced drone for content creators and aerial photography enthusiasts, offering superior image quality in a compact and portable design. Equipped with a 1-inch CMOS sensor camera, it captures detailed photos and smooth 4K video.
The standard version includes a basic starter kit, while the Fly More Combo includes additional batteries, a charging hub, and a carrying case. The drone's specifications remain the same in terms of flight capabilities, image quality, and intelligent features.
Key features
| Camera |
1-inch CMOS sensor, 50 MP |
| Video |
4K/60fps HDR |
| Stabilization |
3-axis gimbal |
| Flight time |
Up to approx. 36 minutes |
| Intelligent modes |
ActiveTrack 360°, QuickShots, Hyperlapse, MasterShots |
| Obstacle detection system |
Multi-directional (front, back, down) |
| Video transmission |
DJI O4 – up to 20 km (FCC) |
Technical specifications
| Model |
DJI Mini 5 Pro |
| Starting weight |
< 249 g |
| Matrix |
1-inch CMOS |
| Photo resolution |
50 MP |
| Video resolution |
4K up to 60 fps |
| Video formats |
MP4 / MOV |
| Max flight time |
Up to 36 minutes |
| Max flight speed |
16 m/s |
| GNSS system |
GPS + Galileo + BeiDou |
Contents of the set
| Drone |
1× DJI Mini 5 Pro Aircraft |
| Controller |
1× DJI Controller (depending on the selected variant) |
| Battery |
1× Intelligent Flight Battery |
| Spare propellers |
1× pair |
| Power cable |
1× USB-C |
| Gimbal cover |
1× Gimbal Protector |
Compatibility
| App |
DJI Fly |
| Accessories |
Accessories dedicated to the DJI Mini 5 Pro series |
Product description
The DJI Mini 5 Pro Intelligent Flight Battery is designed for maximum flight time and reliable performance. It provides up to 36 minutes of flight time on a single charge, enabling longer recording and photography sessions without the need for frequent battery replacement.
The battery offers stable power and is optimized to work with the drone's power management systems, ensuring safe and efficient use during every flight.
Key features
| Maximum flight time |
Up to 36 minutes* |
| Capacity |
2788 mAh |
| Battery type |
Li-ion |
| Stable performance |
Reliable power supply for DJI Mini 5 Pro |
| Original DJI product |
Full compatibility and security |
Technical specifications
| Model |
BWXNN5-2788-7.0 |
| Capacity |
2788 mAh |
| Battery type |
Li-ion |
| Charging temperature |
5° to 40°C |
Contents of the set
| Battery |
1× Intelligent Flight Battery |
Compatibility
* Maximum flight time measured under manufacturer's test conditions. Actual results may vary depending on conditions and use.
Product description
The DJI Mini 5 Pro ND Filter Kit (ND8/32/128) is designed for photographers and videographers who need precise exposure control when shooting in bright conditions or taking long exposure shots. The filters limit the amount of light entering the lens, allowing for slower shutter speeds without the risk of overexposing the image.
Flexible use of the filters in the kit allows you to maintain the 180° shutter principle at low ISO, which translates into smooth, natural-looking video recordings and clear, high-quality photos.
Key features
| Precise exposure control |
Makes working with long shutter speeds easier |
| Smooth recordings in bright light |
Reducing the amount of light entering the lens |
| 180° shutter principle |
Possibility of preserving at low ISO |
| Lightweight construction |
Approx. 1.12 g (single filter) |
| Dedicated fit |
Perfect fit for the DJI Mini 5 Pro |
Technical specifications
| Model |
DJI Mini 5 Pro ND Filter Set (ND8/32/128) |
| Weight (single filter) |
Approx. 1.12 g |
Contents of the set
| ND8 filter |
1× ND8 Filter |
| ND32 filter |
1× ND32 Filter |
| ND128 filter |
1× ND128 Filter |
Compatibility
* The 180° shutter rule refers to the relationship between frame rate and exposure time (e.g. 24 fps → 1/48 s).
Product description
The DJI Mini 5 Pro Two-Way Charging Hub is a practical accessory that enables simultaneous charging and intelligent power management of DJI Mini 5 Pro batteries. It supports a power-accumulation function that allows you to transfer remaining power from multiple batteries to the one with the highest charge, increasing the efficiency of available energy use.
When used with the DJI 65W Portable Charger, you can fully charge three batteries in about 2 hours (or three Battery Plus versions in about 3 hours). The hub can also be used as a power source for fast charging of controllers and smartphones.
Key features
| Energy accumulation function |
Transferring power between batteries |
| Supports three batteries |
Connect up to 3 batteries simultaneously |
| Fast charging |
Up to approximately 2 hours (with DJI 65W Portable Charger) |
| Power bank function |
Charging controllers and smartphones |
| Dedicated compatibility |
DJI Mini 5 Pro Series |
Technical specifications
| Model |
DJI Mini 5 Pro Two-Way Charging Hub |
| Charging temperature |
5° to 40°C |
| Entry |
5-15V, up to 4.3A |
| Exit |
5-15V, up to 2A |
Contents of the set
| Charging hub |
1× Two-Way Charging Hub |
Compatibility
| Batteries |
DJI Mini 5 Pro Intelligent Flight Battery, DJI Mini 5 Pro Intelligent Flight Battery Plus |
* The charging times given were obtained under the manufacturer's test conditions (25°C) and are indicative.
Note: Power supply not included.
Product description
The DJI Flip is a compact and versatile drone designed for action-packed footage and everyday flying. The DJI RC 2 controller provides stable image transmission, intuitive controls, and quick flight setup. This drone is perfect for both beginners and content creators who want to capture their ideas from the air in a simple and effective way.
The DJI Flip offers high image quality, intelligent flight modes, and a stable design, enabling smooth footage and sharp photos in a variety of conditions. Pairing the drone with the DJI RC 2 controller provides convenient operation and full control over the frame and camera settings.
Key features
| Camera |
Advanced camera for high-quality photos and videos |
| Video |
4K UHD |
| Stabilization |
3-axis gimbal |
| Intelligent modes |
QuickShots, object tracking, creative modes |
| Video transmission |
DJI O4 |
| Controller included |
DJI RC 2 |
Technical specifications
| Model |
DJI Flip |
| Video resolution |
Up to 4K |
| Stabilization |
3-axis gimbal |
| Transmission system |
DJI O4 |
| GNSS system |
GPS |
Contents of the set
| Drone |
1× DJI Flip Aircraft |
| Controller |
1× DJI RC 2 |
| Battery |
1× Intelligent Flight Battery |
| Spare propellers |
1× pair |
| Cable |
1× USB-C |
Compatibility
| App |
DJI Fly |
| Accessories |
Accessories dedicated to the DJI Flip series |
Product description
The DJI Flip 2 Fly More Combo is an enhanced bundle for the next-generation DJI Flip compact drone, designed for beginners and content creators who demand high image quality and maximum safety. Featuring a foldable, full-coverage propeller guard, the drone provides enhanced protection during flight, making it an ideal choice for everyday flying and pilot training.
The drone is equipped with a 1/1.3-inch CMOS sensor capable of capturing 48MP photos and 4K/60fps HDR video. The Fly More Combo kit includes three batteries, a parallel charging hub, and a practical carrying bag, significantly extending flight time and increasing the convenience of use in the field.
Key features
| Foldable propeller guard |
Full security to increase flight safety |
| Matrix |
1/1.3″ CMOS, 48 MP |
| Video |
4K/60fps HDR |
| Stop |
f/1.7 |
| AI Subject Tracking |
Intelligent object tracking |
| Flight time |
Up to 31 minutes |
| Libra |
< 249 g |
| Controller included |
DJI RC 2 |
Technical specifications
| Model |
DJI Flip 2 |
| Matrix |
1/1.3″ CMOS |
| Photo resolution |
48 MP |
| Video resolution |
4K up to 60 fps HDR |
| Stop |
f/1.7 |
| Maximum flight time |
Up to 31 minutes |
| Starting weight |
< 249 g |
| Transmission system |
DJI O4 |
| GNSS system |
GPS |
Contents of the set
| Drone |
1× DJI Flip 2 |
| Controller |
1× DJI RC 2 Remote Controller |
| Batteries |
3× Intelligent Flight Battery |
| Charging hub |
1× Parallel Charging Hub |
| Carrying bag | 1× DJI Flip Shoulder Bag |
| Spare propellers |
3× pairs (with screws) |
| Cable |
1× USB-C to USB-C PD |
| Gimbal cover |
1× Gimbal Protector |
| Screwdriver |
1× |
Compatibility
| App |
DJI Fly |
| Accessories |
Accessories dedicated to the DJI Flip series |
Product description
The DJI Flip ND Filter Kit (ND16/64/256) provides precise control over shutter speed, allowing you to create smooth, professional-looking footage even in very bright conditions. The filters limit the amount of light entering the lens, allowing you to use slower shutter speeds and preserve natural motion blur.
Flexible use of filters allows you to maintain the 180° shutter principle at low ISO, which translates into a clear image, correct exposure and cinematic video quality.
Key features
| Precise exposure control |
Makes working with long shutter speeds easier |
| Smooth recordings in bright light |
Reducing the amount of light entering the lens |
| 180° shutter principle |
Possibility of preserving at low ISO |
| Lightweight construction |
0.34 g (single filter) |
| Dedicated fit |
Specially designed for DJI Flip |
Technical specifications
| Model |
DJI Flip ND Filters Set (ND16/64/256) |
| Weight (single filter) |
0.34 g |
Contents of the set
| ND16 filter |
1× ND16 Filter |
| ND64 filter |
1× ND64 Filter |
| ND256 filter |
1× ND256 Filter |
Compatibility
* The 180° shutter rule describes the relationship between frame rate and exposure time (e.g. 24 fps → 1/48 s).
Product description
The DJI Flip Intelligent Flight Battery is designed for long, stable flights, providing up to 31 minutes of flight time on a single charge. Its lightweight design and reliable performance make it an ideal accessory for both a spare battery and a primary power source for your DJI Flip drone.
Thanks to its 3110 mAh capacity and Li-ion technology, the battery offers stable power and fast charging, allowing for shorter breaks between flights and greater freedom when creating shots.
Key features
| Maximum flight time |
Up to 31 minutes* |
| Capacity |
3110 mAh |
| Battery type |
Li-ion |
| Energy |
22.3 Wh |
| Lightweight construction |
Approx. 83.5 g |
| Stable performance |
Reliable power supply for DJI Flip |
Technical specifications
| Model |
BWX141-3110-7.16 |
| Capacity |
3110 mAh |
| Nominal voltage |
7.16 V |
| Maximum charging voltage |
8.6V |
| Energy |
22.3 Wh |
| Battery type |
Li-ion |
| Libra |
Approx. 83.5 g |
| Charging temperature |
5° to 40°C |
Contents of the set
| Battery |
1× Intelligent Flight Battery |
Compatibility
* Maximum flight time measured under manufacturer's test conditions. Actual results may vary depending on conditions, flight style, and software version.
For optimal performance, it is recommended to use the DJI 65W USB-C charger or other chargers compatible with USB Power Delivery.
Product description
The DJI Flip Parallel Charging Hub is a practical accessory that allows you to simultaneously charge and store DJI Flip Intelligent Flight Batteries. When used with the DJI 65W Portable Charger, it allows you to fully charge two batteries simultaneously in approximately 70 minutes, significantly reducing preparation time for your next flight.
The hub can also function as a power bank – with at least one battery installed, it uses the remaining energy to charge devices like FPV goggles or smartphones, increasing the versatility of the entire setup.
Key features
| Parallel charging |
Charging two batteries simultaneously |
| Fast charging |
Approx. 70 min (with 65W charger) |
| Power bank function |
Charging goggles and smartphones |
| Compact design |
Easy storage and transport |
| Dedicated fit |
Specially designed for DJI Flip |
Technical specifications
| Model |
DJI Flip Parallel Charging Hub |
| Entry |
5-15V, max 4.3A |
| Output (charging) |
5-15V, max 3A |
| Charging method |
Charge 2 batteries simultaneously (with ≥65W charger) |
Contents of the set
| Charging hub |
1× DJI Flip Parallel Charging Hub |
Compatibility
Note: The number of batteries charged simultaneously depends on the power of the charger used.
It is recommended to use a charger with a power of at least 65W that supports compatible charging protocols.
Product description
The DJI Manifold 3 is a powerful, enterprise-class on-board computer designed for
advanced data processing on drones. It offers high computing power
up to 100 TOPS, fast communication interfaces and a solid construction adapted
for use in harsh environmental conditions. It is an ideal platform for applications
AI, edge computing and advanced autonomous applications.
Key features
| Computing power |
Up to 100 TOPS (INT8) |
| RAM |
16 GB LPDDR5 |
| Mass storage |
256GB SSD |
| Tightness class |
IP55 |
Technical specifications
| Product name |
Manifold 3 |
| Libra |
120 ± 5 g |
| Dimensions |
98 × 57 × 36 mm (L × W × H) |
| Nominal voltage |
33 V |
| Supported model |
DJI Matrice 400 |
| RAM |
16GB LPDDR5 |
| Mass storage |
256GB SSD |
| Computing power |
Up to 100 TOPS*
*Measurement in the INT8 standard, based on the distributed computing model
|
| E-Port interface |
DJI Matrice 400 E-Port V2 Support |
| USB-C interface |
USB 3.2 Gen 1, up to 5 Gbps
On the Matrice 400, only E1, E2, and E3 ports are supported (E3 recommended)
|
Environmental parameters
| Operating temperature |
-20° to 50° C |
| Storage temperature |
-20° to 60° C |
| Degree of protection |
IP55 |
Power supply
| E-Port Power Supply |
Matrice 400 E-Port V2: 24V input |
| Powered by USB-C |
Power Delivery (PD) support |
Product description
The DJI Manifold 3 is a powerful, enterprise-class on-board computer designed for
advanced data processing on drones. It offers high computing power
up to 100 TOPS, fast communication interfaces and a solid construction adapted
for use in harsh environmental conditions. It is an ideal platform for applications
AI, edge computing and advanced autonomous applications.
Key features
| Computing power |
Up to 100 TOPS (INT8) |
| RAM |
16GB LPDDR5 |
| Mass storage |
256GB SSD |
| Tightness class |
IP55 |
Technical specifications
| Product name |
Manifold 3 |
| Libra |
120 ± 5 g |
| Dimensions |
98 × 57 × 36 mm (L × W × H) |
| Nominal voltage |
33 V |
| Supported model |
DJI Matrice 400 |
| RAM |
16 GB LPDDR5 |
| Mass storage |
256GB SSD |
| Computing power |
Up to 100 TOPS*
*Measurement in the INT8 standard, based on the distributed computing model
|
| E-Port interface |
DJI Matrice 400 E-Port V2 Support |
| USB-C interface |
USB 3.2 Gen 1, up to 5 Gbps
On the Matrice 400, only E1, E2, and E3 ports are supported (E3 recommended)
|
Environmental parameters
| Operating temperature |
-20° to 50° C |
| Storage temperature |
-20° to 60° C |
| Degree of protection |
IP55 |
Power supply
| E-Port Power Supply |
Matrice 400 E-Port V2: 24V input |
| Powered by USB-C |
Power Delivery (PD) support |
Product description
The DJI Manifold 3 is a powerful, enterprise-class on-board computer designed for
advanced data processing on drones. It offers high computing power
up to 100 TOPS, fast communication interfaces and a solid construction adapted
for use in harsh environmental conditions. It is an ideal platform for applications
AI, edge computing and advanced autonomous applications.
Key features
| Computing power |
Up to 100 TOPS (INT8) |
| RAM |
16 GB LPDDR5 |
| Mass storage |
256GB SSD |
| Tightness class |
IP55 |
Technical specifications
| Product name |
Manifold 3 |
| Libra |
120 ± 5 g |
| Dimensions |
98 × 57 × 36 mm (L × W × H) |
| Nominal voltage |
33 V |
| Supported model |
DJI Matrice 400 |
| RAM |
16 GB LPDDR5 |
| Mass storage |
256GB SSD |
| Computing power |
Up to 100 TOPS*
*Measurement in the INT8 standard, based on the distributed computing model
|
| E-Port interface |
DJI Matrice 400 E-Port V2 Support |
| USB-C interface |
USB 3.2 Gen 1, up to 5 Gbps
On the Matrice 400, only E1, E2, and E3 ports are supported (E3 recommended)
|
Environmental parameters
| Operating temperature |
-20° to 50° C |
| Storage temperature |
-20° to 60° C |
| Degree of protection |
IP55 |
Power supply
| E-Port Power Supply |
Matrice 400 E-Port V2: 24V input |
| Powered by USB-C |
Power Delivery (PD) support |
Contents of the set
| Drone |
1× DJI Matrice 400 complete kit (with DJI Care Enterprise Plus – 1 year) |
Aircraft
| Weight without batteries |
5020 ± 20 g |
| Weight with batteries |
9740 ± 40 g |
| Max takeoff weight |
15.8 kg |
| Dimensions unfolded |
980 × 760 × 480 mm |
| Folded dimensions |
490 × 490 × 480 mm |
| Max load capacity |
6 kg |
| Propellers |
25 inches (2510F) |
| Wheel base |
1070 mm |
| Max climb speed |
10 m/s |
| Max descent speed |
8 m/s |
| Max horizontal speed |
25 m/s |
| Max ceiling |
7000 m |
| Max flight time |
59 min |
| Max flight distance |
49 km |
| Wind resistance |
12 m/s |
| Operating temperature |
-20°C to 50°C |
| Degree of protection |
IP55 |
Navigation and positioning
| GNSS |
GPS + Galileo + BeiDou + GLONASS |
| RTK accuracy |
1 cm +1 ppm (H), 1.5 cm +1 ppm (V) |
| ADS-B In |
Up to 20 km |
Gimbal load capacity
| Single port |
1400 g |
| Dual port |
950 g |
| Third port |
3 kg (quick-release) / 6 kg (screws) |
Obstacle avoidance sensors
| System |
Visual + LiDAR + mmWave radar + IR |
| Rotary LiDAR |
0.5–100 m, 360° × 58° |
| mmWave radar |
Up to 50 m |
| Lower IR |
0.3–8 m |
FPV camera
| Resolution |
1080p |
| FOV |
150° |
| Cages |
30 fps |
| Night mode |
Starlight |
Video transmission
| System |
DJI O4 Enterprise |
| Range (FCC) |
Up to 40 km |
| Range (CE) |
Up to 20 km |
| Max bitrate |
80 Mbps |
TB100 battery
| Capacity |
20254 mAh |
| Tension |
48.23 V |
| Energy |
977 Wh |
| Life cycle |
400 cycles |
| Heating |
Yes |
BS100 Charging Station
| Supported batteries | TB100, TB100C, WB37 |
| Channels |
3× TB100, 2× WB37 |
| Modes |
Ready 90%, Standard 100%, Fast, Quiet |
| TB100 charging time |
45 min (fast) |
DJI RC Plus 2 Controller
| Screen |
7.02" LCD 1400 nits |
| System |
Android 11 |
| Memory |
8GB RAM + 128GB ROM |
| Communication |
Wi-Fi 6, Bluetooth 5.2 |
| Working time |
Up to 7 hours (with WB37 battery) |
Compatibility
| Gimbal cameras |
Zenmuse H30, H30T, L2, P1 |
| Accessories |
S1, V1, Manifold 3, SDR, Cellular Dongle |
| RTK stations |
D-RTK 2 / D-RTK 3 |
Product description
The DJI D-RTK 3 Station Tripod is a professional tripod designed for stable installation of the DJI D-RTK 3 Base Station. It ensures solid and precise equipment positioning during surveying, mapping, LiDAR scanning, and other applications requiring high positioning accuracy.
Its durable construction and adjustable height enable quick and safe field setup. The tripod is designed for use in demanding environmental conditions, ensuring stability and reliability during long-term missions.
Key features
| Dedicated fit |
Designed for DJI D-RTK 3 station |
| Stable construction |
Ensures precise positioning of the base station |
| Adjustable height |
Easy adaptation to terrain conditions |
| Professional use |
Surveying, mapping, inspections, LiDAR |
Technical specifications
| Model |
DJI D-RTK 3 Station Tripod |
| Type |
Tripod for RTK base station |
| Material |
Highly durable construction |
Contents of the set
| Tripod |
1× DJI D-RTK 3 Station Tripod |
Compatibility
| Devices |
DJI D-RTK 3 Station |
Product description
The DJI Agras T25 Spreading System is a professional spreading system designed for the precise application of bulk materials in agriculture. It enables the even and controlled distribution of fertilizers, seeds, and granules, increasing work efficiency and reducing material losses.
The system is optimized for use with the DJI Agras T25 drone, ensuring stable material delivery and high operational efficiency. It's an ideal solution for modern farms utilizing drone technology for precision farming.
Key features
| Precise spreading |
Even distribution of bulk materials |
| High performance |
Optimization of work on large farms |
| Controlled dosing |
Stable and adjustable material feeding |
| Application |
Fertilizers, seeds, granules |
| Dedicated fit |
Designed for DJI Agras T25 |
Technical specifications
| Model |
DJI Agras T25 Spreading System |
| System type |
Bulk material spreading system |
| Application |
Precision agriculture |
Contents of the set
| Spreading system |
1× DJI Agras T25 Spreading System |
| Mounting elements |
Mounting kit |
Compatibility
